-Easy application
– Transparent when dry
– High bond strength
– Fast drying
– Resistant to high temperatures
– Interior applications with frequent short-term exposure of the bonds to running or condensed water
– Interior applications with long-term exposure of the bonds to high humidity
– Exterior applications which are not exposed to weather
– Manufacturing of door and window-frames that need to meet class D3 according to EN204.
– Bonding of wood, board, chipboard, veneer Mounting of soft wood
– Construction bonding such as mortise and tenon joints, punches, etc.
– Stationary edge-banding with veneers, plastic laminates and solid wood strips
– Surface bonding of decor-finish film, HPL and CPL to chipboard, MDF and Triplex
– Bonding joints in boards and block bonding of softwood, hardwood and chipboard
Method: apply the adhesive by means of a brush, notched trowel or mechanically to one of the to be bonded substrates. Join the parts together and press for 1 – 2 hours.
Application temperature: Temperature of working space, adhesive and substrates 18°C to 20°C
Pressing times: if applicable; the curing time depends strongly on the used kind of wood, temperature, amount of adhesive, the porosity of the materials to be bonded and the production rate.
Clean: Uncured Pro30D Waterproof Wood
Adhesive may be removed from materials and tools with water. Cured adhesive must be removed mechanically.
Repair: with Pro30D Waterproof Wood Adhesive