Extremely high initial grab; > 200 kg/m² (full surface bonding)
– Good workability with included triangular shaped nozzle
– Primerless adhesion on most surfaces (except where capillary water
pressure can occur)
– High performance mechanical properties on nearly all surfaces
– Excellent adhesion on porous and non porous substrates
– Flexible to accommodate for thermal expansion or vibrations of bonded
surfaces
– Straightforward application even in adverse conditions
– Ecological advantages – free of isocyanates, solvents, halogens and
acids
– No staining of porous materials such as natural stone, granite,
marble, etc
– Structural elastic bonding in the building and metal working industry
– Structural bonding applications in the automotive industry (cars,
coaches, caravans, marine, trains)
– Elastic bonding of panels, profiles and other pieces on the most
common substrates
Method: Apply the adhesive by means of a caulking gun onto one surface in beads or dabs (every 15 cm. for panels). Always apply adhesive to the
edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required. The bond can be loaded after 24-48 hours.
Application temperature: +1°C until +30°C
Clean: Uncured Soudaseal Supertack may be removed from tools and materials with White Spirit or Surface Cleaner. Cured adhesive must be
removed mechanically. Repair with: Soudaseal Supertack
– When bonding, the pressure applied determines the final bonding
strength. The duration during which pressure is applied is
less important.
– Soudaseal Supertack may be overpainted with waterbased paints,
however due to the large number of paints and varnishes available we
strongly suggest a compability test before application. The drying
time of alkyd resin based paints may increase.
– Soudaseal Supertack can be applied to a wide variety of substrates.
Due to the fact that specific substrates such as plastics,
polycarbonate, etc, may differ from manufacturer to manufacturer, a
preliminary compatibilty test is recommended.
– Soudaseal Supertack should not be used for glazing applications
