– Completely transparant
– Outstanding bond strength on nearly all surfaces
– High performance mechanical properties
– Very easy to tool and finish
– Good extrudability even at low temperatures
– Ecological advantages – free of isocyanates, solvents, halogens and
acids
– Minimal health and safety considerations
– Can be painted with water based paints and a number of other systems
(preliminary test required)
– Permanently elastic after full cure
– All interior and exterior bonding and sealing applications
– Transparent and elastic bonding in many different construction and
building applications
– Invisible bonding of glass and other transparent materials.
– Joint dimensions:
– Maximum Width:1mm (connecting joints)
– Application:
– Method: Manual- or pneumatic caulking gun
– Application temperature: +5°C until +35°C
– Cleaning:
– Fix All Cleaner immediately after application and before curing
– Tooling:
– with soapy solution before skin formation
– Repair with: Fix All Crystal
– Fix All Crystal may be overpainted, however due to the large number
of paints and varnishes available we strongly suggest a compatibility
test before application. The drying time of alkyd resin based paints
may increase.
– Due to the wide variety of possible substrates, Soudal recommends a
preliminary compatibility test.
– Fix All Crystal can be applied to a wide variety of substrates. Due
to the fact that specific substrates such as plastics, like
polycarbonate, etc, may differ from manufacturer to manufacturer, we
recommend preliminary compatibilty test.
– Not suitable for dilatation joints
– Do not use in applications where continuous water immersion is
possible or in sanitary applications.
– Fix All Crystal displays very good UV stability but may discolour in
extreme conditions or after many years of exposure.
– This product can not be used as a glazing sealant.
