– Easy to wash into cracks
– Can be painted over directly with masonry paint
– Can be painted over after curing
– Very good adhesion on many porous surfaces
– Sealing compound for cracks in concrete and plaster
– Joints between windowsills, between skirtingboard and floor, between
brickwork, etc.
Method: Apply the sealant, in case of repairing cracks in plaster or concrete, by means of a handheld or pneumatic caulking gun. Paint over
directly with masonry paint or smoothen with a wet
sponge.
Apply the sealant, in case of sealing joints, by means of a handheld or pneumatic caulking gun. Smoothen the sealant with a filling-knife.
Application temperature: +5°C to +30°C, do not apply when rain or frost are imminent
Clean: Uncured Soudafill may be removed from tools with water. Cured sealant must be removed mechanically.
Finishing: with soapy water
Repair: with Soudafill
– Do not use in applications where continuous water immersion is
possible.
– Do not apply when rain or frost is imminent
– Soudafill can be painted over with most paints.
– The paint should be sufficiently elastic to be applied on a plasto-
elastic sealant.
– A preliminary test is recommended.
