Montagepro 140

– Extremely suitable for the bonding of heavy materials such as wood,
synthetic building materials, panels, metal, stones etc. to several
substrates such as wood, stones, plaster, chipboard etc.

Method: Apply the adhesive by means of a caulking gun onto one surface in beads or dabs (every 15 cm. for panels). Always apply adhesive to the
edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required. The bond can be loaded after 24-48 hours.
Application temperature: +5°C to +35°C
Clean: with water if not cured, mechanically if cured
Repair: with same material

– When bonding, the pressure applied determines the initial grab and
the final bonding strength. The duration during which pressure is
applied is less important.
– Do not use in applications where continuous immersion is possible.