– Elastic
– EC-1R PLUS label: very low emission
– Ready to use, single component
– Solvent free
– Contains no water
– Free of isocyanates
– Easy to apply
– Forms stable peaks once applied by a notched trowel or spreader comb
– Rapid cure and build up of final bond strength
– High final bond strength (according to EN14293)
– Suitable for underfloor heating
– Avoids staining of the hands
MS-20PLUS is a solvent, and water-free universal parquet adhesive based upon polymers. Suitable for indoor bonding of engineered boards ready to
use parquet and solid wood.
Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large
particle size chipboard) , including floors with underfloor heating and cooling.
MS-20PLUS should be acclimatised to room temperature before installation. Apply the adhesive to the surface by means of notched SOUDAL trowel N°11. For parquet sizes smaller than 60mm wide and 300mm long notched SOUDAL trowel N°3 is recommended. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer.
A minimum of 80% contact coverage is required to ensure a perfect adhesion. Loading the parquet with weights will improve the final bond strength.
Wait at least 24 h before sanding and finishing the parquet.
Uncured MS-20PLUS may be removed from tools and parquet with SOUDAL Adhesive cleaner or SWIPEX. Cured adhesive must be removed mechanically.
