– High bond strength on nearly all surfaces
– Can be painted with most water based paints (see remarks)
– Excellent adhesion on glass, wood, metal and PVC
– Ecological advantages – free from isocyanates, solvents, halogens and
acids
– Flexible elastic rubber – movement accommodation up to 20%
– Straightforward application even in adverse conditions
– No bubble formation within sealant (in high temperature and humidity
applications)
– Primerless adhesion on many substrates (consult our Technical Service
for more details)
– Easy to tool and finish with soapy water
– Good extrudability even at low temperatures
– Colour stable and UV resistant
– Minimal health and safety considerations
– High bond strength on nearly all surfaces
– Can be painted with most water based paints (see remarks)
– Excellent adhesion on glass, wood, metal and PVC
– Ecological advantages – free from isocyanates, solvents, halogens and
acids
– Flexible elastic rubber – movement accommodation up to 20%
– Straightforward application even in adverse conditions
– No bubble formation within sealant (in high temperature and humidity
applications)
– Primerless adhesion on many substrates (consult our Technical Service
for more details)
– Easy to tool and finish with soapy water
– Good extrudability even at low temperatures
– Colour stable and UV resistant
– Minimal health and safety considerations
Glazing sealant between glass and all usual frame materials: timber, aluminium, steel, PVC. Specially developed for use on self-cleaning glass(Bioclean® and Activ Glass®)
– Soudal SMX® 506 can be painted with water based paints. However due
to the large number of paints and varnishes available we strongly
suggest a compatibility test before application
– Remove all traces of soap (tooling) because it will harm the adhesion
of the paint onto the sealant
– The use of metal spatula or other hard tooling equipment on Self-
cleaning glass is not recommended in order to prevent the damaging
of the active layer of the glass
– We recommend the use of Soudaseal 215 LM for all perimeter joints
(between wall and window profiles) in applications where Selfcleaning
glass is used
– SMX® 506 should never be used in applications where stagnant water
can occur. We therefore always recommend a minimum pitch of the
substrates of 10°
