– Completely transparent
– Outstanding bond strength, mostly without primer, on nearly all
surfaces, even moist.
– High performance mechanical properties
– Very easy to tool and finish
– Good extrudability even at low temperatures
– Ecological advantages – free of isocyanates, solvents, halogens and
acids
– Minimal health and safety considerations
– Can be painted with water based paints and a number of other systems
(preliminary test required)
– Permanently elastic after full cure
– All interior and exterior bonding and sealing applications
– Transparent and elastic bonding in many different construction and
building applications
– Interior bonding of glass and other transparent materials (cannot be
used as a glazing sealant).
Method: Manual- or pneumatic caulking gun
Application temperature: +5°C until +35°C
Cleaning: Fix ALL Cleaner immediately after application and before curing
Tooling: with soapy solution before skin formation
Repair with: Soudaseal MS Clear
– Soudaseal MS Clear may be overpainted, however due to the large
number of paints and varnishes available we strongly suggest a
compatibility test before application. The drying time of alkyd resin
based paints may increase.
– Due to the wide variety of possible substrates, Soudal recommends a
preliminary compatibility test.
– Soudaseal MS Clear can be applied to a wide variety of substrates.
Due to the fact that specific substrates such as plastics, like
polycarbonate, etc, may differ from manufacturer to manufacturer, we
recommend preliminary compatibility test.
– Not suitable for dilatation joints
– Do not use in applications where continuous water immersion is
possible or in sanitary applications.
– Soudaseal MS Clear displays very good UV stability but may discolour
in extreme conditions or after long term exposure.
– This product can not be used as a glazing sealant.
